Nautical 42" Fire Pit Table

• 43" W x 23.75" D x 43" H (138 lbs.)
• Fire Table Output: 55,000 BTUs

• POLYWOOD® Lumber is dense, durable, and virtually maintenance free
• Unlike natural wood, composite lumber won't crack, fade, or rot over time
• Built to withstand a range of climates, including hot sun, snowy winters, and strong coastal winds
• High Density Polyethylene (HDPE) frames manufactured using landfill-bound and ocean-bound plastics
• UV protectant and color infused into the lumber; no painting or waterproofing needed
• Marine-grade quality hardware
• Classic texture finishes have a smooth feel; Vintage finishes have a wood-look texture and are not as smooth as Classic finishes
• Made in the USA
• Fire table can run for about 8 hours using a 20 lb. propane tank, or it can be hooked up to a natural gas line
• Easy access to propane tank through side door with hidden hinge and strong magnetic latch
• Crystal Fire® Plus Burner is UL listed for extra safety and offers an adjustable flame height
• Some assembly required

POLYWOOD's warranty covers manufacturing defects; normal wear and tear is not included. With a little bit of care, your POLYWOOD furniture and fabric will outlive the warranty by many years.

• POLYWOOD Frames:POLYWOOD® warranties to the original purchaser that, for a period of twenty (20) years of residential use from the date of purchase, under normal use and service conditions, POLYWOOD® furniture shall be free from material defects, and shall not splinter, crack, chip, peel, or rot, or suffer structural damage from insect infestation. Commercial warranty is three (3) years.

How to Clean & Sanitize POLYWOOD Furniture: Use this method for quick clean-ups throughout the season. Add in the bleach solution noted below to easily sanitize and eliminate any stubborn stains or dirt build-up from the winter months.All you need to clean POLYWOOD is mild dish soap, warm water, and a soft cloth! For extra cleaning power or to sanitize, mix 1/3 parts bleach with 2/3 parts water and apply the bleach mixture to the finish with a clean cloth. Allow the bleach solution to sit on the lumber for a few minutes; it will not affect the color of the lumber. Loosen any dirt or debris that may catch in the surface grooves of the lumber by scrubbing the bleach mixture with a soft-bristle brush. Rinse thoroughly, and air dry or wipe dry with a soft cloth.How to Clean Outdoor Fabric: Small stains can be removed with a mixture of mild dish soap and water. For tougher stains, mix 1 ounce of bleach with 30 ounces of water in a spray bottle. If possible, place a clean towel between the fabric and foam cushion to absorb any excess moisture. Set the nozzle to "fan", then spray and wet out the entire side of the cover where the stain is. Wipe the entire cover with a clean cloth to remove any excess moisture, then spray the same area with clean water to rinse the bleach solution out of the fabric. Wipe the entire cover again with a clean cloth to remove any excess moisture, then allow the cover to air dry.